Reply to thread

Message: <blockquote data-quote="Vincent9515" data-source="post: 1685154" data-attributes="member: 564698">I don't have anything to draw it out with.  To run it along the entire bottom, plan on giving up a lot of airspace to tune it that low.If it's 24" wide, it will need to be 3" tall to stay below the 1:8 ratio.  That's 72"^2 of port.  It will need to be over 30" long to be tuned where you want it.  That's like 1.5 cubes.Maybe run it vertically down the center with separate chambers.</blockquote>

Top