Reply to thread

Message: <blockquote data-quote="jj53913" data-source="post: 5343410" data-attributes="member: 580609"><p>I am looking for some help.  I am looking at building a box for 2 subs with the port centered in the box.  The port and subs both facing forward (going in an ex-cab pickup)  The port will have to be longer than the box is deep so I have to figure out how to make the port split.  If you were looking down on the box the back of the port woult look like a "T" I guess is how to explain it.  My question is say the opening is 10"x10"=100 cu.in. when it T's to the left and right would I want the port to measure 5"x10" on each side to finish the port length out or does it stay 10"x10"?  Thanks for the help</p></blockquote><p></p>

Top