Reply to thread

Message: <blockquote data-quote="tccity" data-source="post: 141018" data-attributes="member: 546420">lexan is a layer type acryllic and plexiglas is a molded plastic ..... lexan is harder and stronger and will give a higher gloss but will set you back more $$$$.    plexiglass is fine for a amprack just make sure you get like 3/8" and pre-drill...... just  a tip  cut with paper on and drill with paper on,  drill slow and use oil or lubricant for best results.....want a cool look use a chisel on the edges and hide a blue neon tube under amp when done the plexi will look like chipped ice.good luck</blockquote>

Top