Reply to thread

Message: <blockquote data-quote="Buckshot" data-source="post: 5205062" data-attributes="member: 558642">I wouldn't use regular poly resin it doesn't like to stick to plastic.  As far as an alternative, anything that you can sample on your piece of plexy, let it dry and try to knock it off.  If it won't come off, it should hold it in there.  I can't give a specific because I've never messed with it.I do know that you can drill pilot holes, run a bead of silicone, and use screws to hold it on, but then you have to have a beauty panel to cover the screws and bead of sillyputty.</blockquote>

Top