Reply to thread

Message

<blockquote data-quote="Phoenix Risen" data-source="post: 7210525" data-attributes="member: 623425">ive got a deka in the trunk and the factory bat up front, has been that way for around a year, but my front batt now rests way low when disconnected from the deka. ive got a kinetik hc 1400 to go under the hood as soon as things warm up and a second deka for the trunk. if your going to run different batts for a long period of time a battery isolator may be a good investment.as far as the terminals, yea thats a good time to do it, that said i still have ring terminals on all of mine, when you do the big 3 its also best to leave the factory wires there so that all the systems that need it still have power.one of the easiest way to make sure a box will fit or to figure out what will fit is to make a mock up of the side that you need to get the proper air space out of cardboard. its cheap and will tell you exactly what you can get in your car and also tell you exactly what room you have around the box for sub and port placement. not to mention that is a lot less frustrating and expensive than building a box of mdf and it not fitting. also you might look into putting the box in through the back seats if they are easy to get out or fold down, i know the 09 does fold down but not sure on the 06</blockquote>

[QUOTE="Phoenix Risen, post: 7210525, member: 623425"] ive got a deka in the trunk and the factory bat up front, has been that way for around a year, but my front batt now rests way low when disconnected from the deka. ive got a kinetik hc 1400 to go under the hood as soon as things warm up and a second deka for the trunk. if your going to run different batts for a long period of time a battery isolator may be a good investment. as far as the terminals, yea thats a good time to do it, that said i still have ring terminals on all of mine, when you do the big 3 its also best to leave the factory wires there so that all the systems that need it still have power. one of the easiest way to make sure a box will fit or to figure out what will fit is to make a mock up of the side that you need to get the proper air space out of cardboard. its cheap and will tell you exactly what you can get in your car and also tell you exactly what room you have around the box for sub and port placement. not to mention that is a lot less frustrating and expensive than building a box of mdf and it not fitting. also you might look into putting the box in through the back seats if they are easy to get out or fold down, i know the 09 does fold down but not sure on the 06 [/QUOTE]

Verification