Reply to thread

Message: <blockquote data-quote="req" data-source="post: 4363809" data-attributes="member: 555713">he said he wanted .75 for each speaker.i was totally going on INTERNAL dimensions, this has nothing to do with subtracting - as usable space is internal space. i did not forget to do anything. you forgot to list that you subtracted MDF displacement.those dimensions you listed and information in the post yield 2.2 cubic feet period. and also, YOU forgot to take into account that the depth of the driver is 9.125" deep. on top of that, you forgot that you do NOT subtract 1.5" from each dimension. you subtract it from only overlapping sides. unless you start backwards with the outer dimensions... then you might make mistakes and end up with strange cut sizes and all sorts of other oddities.so in short, the ID10 will not even fit in the enclosure size you listed.have a nice day.</blockquote>

Top