Reply to thread

Message

<blockquote data-quote="yischrax" data-source="post: 6782968" data-attributes="member: 555698"><p>caps are buffers only needed if your deep cycle is slow to release its charge at least caps in the use as you speak of like most people have said skip on the cap not going to help your issue. You can also look at Jegs for a power master battery good batteries too if you do make sure you get the terminals I ordered from them didn&#039;t know the battery didn&#039;t come with top posts had to order them and wait to put it in good thing is there quick to do so. Ordering around town is always nice if you can get a decent price do to warranty issues. A lot of good info here as to what to do. Honestly if your just running with your vehicle on upgrade battery under the hood to the biggest thing you can fit and rather than having more storing capability get a bigger power maker (alt.) as it looks thought your not going to have a monster draw unless I missed something. Just cuz you only NEED 4 Gauge for the sub amp run 0 gauge lower resistance solder ring terminals keep grounds short and to bare metal in a good spot all the little stuff to utilize the most power you can that you already have.</p></blockquote><p></p>

[QUOTE="yischrax, post: 6782968, member: 555698"] caps are buffers only needed if your deep cycle is slow to release its charge at least caps in the use as you speak of like most people have said skip on the cap not going to help your issue. You can also look at Jegs for a power master battery good batteries too if you do make sure you get the terminals I ordered from them didn't know the battery didn't come with top posts had to order them and wait to put it in good thing is there quick to do so. Ordering around town is always nice if you can get a decent price do to warranty issues. A lot of good info here as to what to do. Honestly if your just running with your vehicle on upgrade battery under the hood to the biggest thing you can fit and rather than having more storing capability get a bigger power maker (alt.) as it looks thought your not going to have a monster draw unless I missed something. Just cuz you only NEED 4 Gauge for the sub amp run 0 gauge lower resistance solder ring terminals keep grounds short and to bare metal in a good spot all the little stuff to utilize the most power you can that you already have. [/QUOTE]

Verification