Reply to thread

Message: <blockquote data-quote="Decado" data-source="post: 1072893" data-attributes="member: 562098"><p>Ok, so i'm trying to set my gains so that i get 49 volts when bridged (600 rms @ 4 ohms).  So i set each gain separately to 24.5 volts and then when i test the voltage bridged i only get 35, what is up with this?  Should i set each gain to 34.3 so that i get 49 bridged(i came to this number by 35/24.5=1.43 and 49/1.43=34.3) or is this some other problem?</p></blockquote><p></p>

Top