Reply to thread

Message

<blockquote data-quote="AudioEnthusiast" data-source="post: 6449713" data-attributes="member: 616182">ok.&nbsp; that sounds good.i would put your speakers in and all of your wiring to your amp and hook all of the wires that need to be hooked up to your hu.&nbsp; you will not hook up your speakers that go in your door and back speakers to the amp.&nbsp; those will be attached to the existing wiring of your old speakers.&nbsp; make sure you get positive with positive and negative with negative.&nbsp; i would also put your amp in and get all of the wires ran, except for the wires going to your subs. that way all you&#039;ll have to do when you get your box done is run your wires to your subs.&nbsp; oh and on those subs if you get the Pioneer subs you will want to get the dual two ohm. <a href="http://www.sonicelectronix.com/item_8341_Pioneer+TS-W307D2.html" target="_blank">http://www.sonicelectronix.com/item_8341_Pioneer+TS-W307D2.html</a>thats the link to check them out.&nbsp; when you wire them up you will want both of your speaker wires going to where it says dual 2 ohm on the amp.</blockquote>

[QUOTE="AudioEnthusiast, post: 6449713, member: 616182"] ok. that sounds good. i would put your speakers in and all of your wiring to your amp and hook all of the wires that need to be hooked up to your hu. you will not hook up your speakers that go in your door and back speakers to the amp. those will be attached to the existing wiring of your old speakers. make sure you get positive with positive and negative with negative. i would also put your amp in and get all of the wires ran, except for the wires going to your subs. that way all you'll have to do when you get your box done is run your wires to your subs. oh and on those subs if you get the Pioneer subs you will want to get the dual two ohm. [URL="http://www.sonicelectronix.com/item_8341_Pioneer+TS-W307D2.html"]http://www.sonicelectronix.com/item_8341_Pioneer+TS-W307D2.html[/URL] thats the link to check them out. when you wire them up you will want both of your speaker wires going to where it says dual 2 ohm on the amp. [/QUOTE]

Verification