Reply to thread

Message

<blockquote data-quote="Popez" data-source="post: 1319589" data-attributes="member: 564988">the subs (2): <a href="http://www.crutchfield.com/S-Zl3TTvFjbHT/cgi-bin/ProdView.asp?I=1081240W" target="_blank">http://www.crutchfield.com/S-Zl3TTvFjbHT/cgi-bin/ProdView.asp?I=1081240W</a>This is about all the information I have:&quot;Recommended Ported Box Volume: Infinity recommends a ported enclosure with an internal volume of 2.0 cu/ft with one 4&quot; diameter x 12-1/4&quot; long port.&quot;Now for the Q&#039;s... so i can draw a plan upSo ive got the volumes i need... does it matter what lxwxh combination I use to achieve this volume or would there be a specific one that would give me the best results?This might sound stupid, but what exactly is a port, where does it go, and how do I tune it?Which way should I draw the box facing? should the port and the subs generally face toward the front or the back of the car?does the box have to go right up against the back seat? the way that my trunk is, its narrower right up against the back seat because of the wheels and then it widens up...agiainst the back seat: Length: 19&quot; Depth: 36&quot; height&quot; 17&quot;6&quot; away from the back seat(where it widens up): Length: 41&quot; Depth: 30&quot; Height: 19.5&quot;as you can tell, the bottom of my trunk is a bit slanted, getting lower the farther you get from the back seat. Will this be a problem for the subs or box?When I start building, what should I do first before I start cutting up the wood?I&#039;m building a dual box, how much space should be inbetween the 2 chambers?umm please dont let this topic die, i am a total noob so ill really appreciate if you guys try to answer as many of these Q&#039;s as you can. I&#039;ll update the topic with more Qs and pics once I get started.</blockquote>

[QUOTE="Popez, post: 1319589, member: 564988"] the subs (2): [URL="http://www.crutchfield.com/S-Zl3TTvFjbHT/cgi-bin/ProdView.asp?I=1081240W"]http://www.crutchfield.com/S-Zl3TTvFjbHT/cgi-bin/ProdView.asp?I=1081240W[/URL] This is about all the information I have: "Recommended Ported Box Volume: Infinity recommends a ported enclosure with an internal volume of 2.0 cu/ft with one 4" diameter x 12-1/4" long port." Now for the Q's... so i can draw a plan up So ive got the volumes i need... does it matter what lxwxh combination I use to achieve this volume or would there be a specific one that would give me the best results? This might sound stupid, but what exactly is a port, where does it go, and how do I tune it? Which way should I draw the box facing? should the port and the subs generally face toward the front or the back of the car? does the box have to go right up against the back seat? the way that my trunk is, its narrower right up against the back seat because of the wheels and then it widens up... agiainst the back seat: Length: 19" Depth: 36" height" 17" 6" away from the back seat(where it widens up): Length: 41" Depth: 30" Height: 19.5" as you can tell, the bottom of my trunk is a bit slanted, getting lower the farther you get from the back seat. Will this be a problem for the subs or box? When I start building, what should I do first before I start cutting up the wood? I'm building a dual box, how much space should be inbetween the 2 chambers? umm please dont let this topic die, i am a total noob so ill really appreciate if you guys try to answer as many of these Q's as you can. I'll update the topic with more Qs and pics once I get started. [/QUOTE]

Verification