Reply to thread

Message

<blockquote data-quote="Rmajano" data-source="post: 6089925" data-attributes="member: 612081">I have recentely installed a audio system on my boat, I have the followingqty&nbsp;&nbsp; Size&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Rating&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Location8&nbsp; &nbsp; &nbsp; 6 x 9&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; (90 rms each)&nbsp;&nbsp; Tower custom box4&nbsp; &nbsp; &nbsp; 6 1/2&quot;&nbsp; &nbsp; &nbsp; &nbsp; (65 rms each)&nbsp;&nbsp; Interior&nbsp; Front/Back1&nbsp; &nbsp; &nbsp; Sub 15&quot;&nbsp; &nbsp;&nbsp; (750 rms)&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Behind DriverPowering these speakers I have2&nbsp; &nbsp; &nbsp; kickers 08zx650.4&nbsp; &nbsp;&nbsp; For towers1&nbsp; &nbsp; &nbsp; kicker&nbsp;&nbsp; 08zx350.4&nbsp; &nbsp;&nbsp; For interiors1&nbsp; &nbsp; &nbsp; kicker&nbsp;&nbsp; 08zx750.1&nbsp; &nbsp;&nbsp; Mono D for subMy problem after doing the wiring is static, engine noise, hissing and more importantly power.&nbsp; &nbsp; I have two marine batterys and it&#039;s not supplying enough juice to my amps, should I replace with yellow tops, or batcap, or kinetic batteries?&nbsp; I wanna be able to chill in the water, dock and play the system for at least 2 hours??&nbsp; &nbsp; Next is the grounding I think I dont have enough and thats why I;m getting noise.&nbsp; Since its a boat I grounded everything to the negative terminal on the main battery, should I distribute with other battery how do I deal with this problem?&nbsp; &nbsp; I&#039;m running 0 gauge from positive to a circuit breaker 100 amp circuit breaker for the sub and interior speakers and 0 guage to circuit breaker 120 amps for the tower speakers, then from the circuit breaker 4 guage to the amps.&nbsp;&nbsp; My amp for the woofer is on the opposite side of the boat so I had to drill on the hull to shorted the distance and the run is 5 feet for power and ground, the other amps are very close to the batteries.&nbsp;&nbsp; Need help?&nbsp; Anybody?</blockquote>

[QUOTE="Rmajano, post: 6089925, member: 612081"] I have recentely installed a audio system on my boat, I have the following qty Size Rating Location 8 6 x 9 (90 rms each) Tower custom box 4 6 1/2" (65 rms each) Interior Front/Back 1 Sub 15" (750 rms) Behind Driver Powering these speakers I have 2 kickers 08zx650.4 For towers 1 kicker 08zx350.4 For interiors 1 kicker 08zx750.1 Mono D for sub My problem after doing the wiring is static, engine noise, hissing and more importantly power. I have two marine batterys and it's not supplying enough juice to my amps, should I replace with yellow tops, or batcap, or kinetic batteries? I wanna be able to chill in the water, dock and play the system for at least 2 hours?? Next is the grounding I think I dont have enough and thats why I;m getting noise. Since its a boat I grounded everything to the negative terminal on the main battery, should I distribute with other battery how do I deal with this problem? I'm running 0 gauge from positive to a circuit breaker 100 amp circuit breaker for the sub and interior speakers and 0 guage to circuit breaker 120 amps for the tower speakers, then from the circuit breaker 4 guage to the amps. My amp for the woofer is on the opposite side of the boat so I had to drill on the hull to shorted the distance and the run is 5 feet for power and ground, the other amps are very close to the batteries. Need help? Anybody? [/QUOTE]

Verification