Reply to thread

Message: <blockquote data-quote="jjhirsch" data-source="post: 608950" data-attributes="member: 557891"><p>OK Heres the problem. I recently installed my amp and speakers in my CSVT and came across a problem. The amp is a Xtant 404m and the speakers are JL W-3's 12 inch. I ran all the wires and as soon as I hooked up the power wire a small amount of smoke came out...which cant be good.... The amp was already grounded. And since then the red light has been on every time I start the car to see if it works. There are 3 lights, green, orange, red. No other lights come on. The fuse in tghe power wire is fine(30amp). So I decided to take the cover off the amp and found 2 small resistors that looked burned...Numbers R19 and R20 next to them on the board. Can these be fixed?? And am I right on guessing that those are whats causing no amp and red light??? Any help would be great guys!!!</p></blockquote><p></p>

Top