Reply to thread

Message

<blockquote data-quote="misfit138" data-source="post: 6736487" data-attributes="member: 611275">Hmmm.&nbsp; Why post this info again?Anyway, to answer your question about the sub;&nbsp; The 2 ohm dvc model can be wired to 1 ohm, which will allow you to get more power from your amplfier.&nbsp; However, the amplifier has to be 1 ohm stable, and the Alpine model you&#039;re thinking of buying isn&#039;t.Recommending an enclosure type depends heavily on what you want your music to sound like.&nbsp; Sealed enclosures are generally more accurate while ported boxes are often louder (that&#039;s the short answer).&nbsp; Also, some subwoofers are designed to perform better in sealed enclosures, whereas others are best suited for ported applications.You&#039;ll want to purchase a distribution block if you plan to run two amplifiers.&nbsp; This isn&#039;t essential, but it&#039;s nice.As far as what I think, I&#039;ll say the same thing I said earlier.&nbsp; You can do better, home slice...</blockquote>

[QUOTE="misfit138, post: 6736487, member: 611275"] Hmmm. Why post this info again? Anyway, to answer your question about the sub; The 2 ohm dvc model can be wired to 1 ohm, which will allow you to get more power from your amplfier. However, the amplifier has to be 1 ohm stable, and the Alpine model you're thinking of buying isn't. Recommending an enclosure type depends heavily on what you want your music to sound like. Sealed enclosures are generally more accurate while ported boxes are often louder (that's the short answer). Also, some subwoofers are designed to perform better in sealed enclosures, whereas others are best suited for ported applications. You'll want to purchase a distribution block if you plan to run two amplifiers. This isn't essential, but it's nice. As far as what I think, I'll say the same thing I said earlier. You can do better, home slice... [/QUOTE]

Verification