Reply to thread

Message: <blockquote data-quote="breed_corona07" data-source="post: 5226459" data-attributes="member: 602042"><p>i was thinking that i was at 2ohms( im a dumb a$$) southwest helped me realize that was wrong, it  is DVC, its wired at 1ohm, but i have it wired to i can switch between 1 or 4 ohms, the amp has two positive terminals, and two negs, i jus ran a speaker wire from each coil up to amp, and if i want to run it at 4 ohms, i could just disconnect the neg from Coil 1 and the Pos from coil 2 and clamp them together, and i grounded it to the same spot where the battery is grounded.</p></blockquote><p></p>

Top