Reply to thread

Message: <blockquote data-quote="helotaxi" data-source="post: 2289425" data-attributes="member: 550915">You have some very conflicting goals there.  You want some really trick custom results but you say that you don't want to do a lot of fabrication.  My install is pretty simple and it still required a good amout of fab work.A floating amp rack with backlighting is usually done with plexi.  It's gonna cost a lot of coin and if you've not worked much with plexi, good luck.How much experience do you have with installation and fab work?  If you don't have a lot, I don't think I would start with quite such an ambitious project.</blockquote>

Top