Reply to thread

Message: <blockquote data-quote="L1ttlet" data-source="post: 8664228" data-attributes="member: 675617"><p>Build is all done! Now I'm having one major issue. The amps are vibrating like crazy. Ugh. Fml. All done started playing music then that happened. So the amp rack is bolted to the back of the box via a 3/8 thick threaded rod about 4 inches long. Then I glued two pieces of rubber together ( old xmas matt I recycled) they are almost half inch thick then 2 2x4s. The amp rack is screwed to the 2x4s then the amps themselves are on rubber ft. They are vibrating but the box isn't. Plz help. Should I replace the 2x4 with 3 5/8 mdf glued together. Would that work?</p></blockquote><p></p>

Top