Reply to thread

Message

<blockquote data-quote="brandontw" data-source="post: 579466" data-attributes="member: 553125">I just got my planet audio PA_2500d, I plugged it all in, and the output is barely audible at all. Tried new set of RCA&#039;s, no change, I also disconnected my four channel amp and listened to just the subs, and it was very strange, it was audible, but then I cranked it a little, and it got louder but didnâ€™t sound right at all, the subs were moving quite a bit, but the sound wasnâ€™t like bass, it was just like a moving subs sound, odd. All wires are fine, messed with all level adjustments and crossovers, no difference, messed with the HU adjustments, no difference, tried on a different output from the HU--nothing. I have 2 dual 4 ohm RF hx2â€™s, wired to 2 ohms a piece, then bridged for 1 ohm to the amp, they are both in separate sealed boxes with a volume of 1.25 CU.FT.</blockquote>

[QUOTE="brandontw, post: 579466, member: 553125"] [COLOR=black]I just got my planet audio PA_2500d, I plugged it all in, and the output is barely audible at all. [/COLOR] [COLOR=black]Tried new set of RCA's, no change, I also disconnected my four channel amp and listened to just the subs, and it was very strange, it was audible, but then I cranked it a little, and it got louder but didnâ€™t sound right at all, the subs were moving quite a bit, but the sound wasnâ€™t like bass, it was just like a moving subs sound, odd. [/COLOR] [COLOR=black]All wires are fine, messed with all level adjustments and crossovers, no difference, messed with the HU adjustments, no difference, tried on a different output from the HU--nothing. [/COLOR] [COLOR=black]I have 2 dual 4 ohm RF hx2â€™s, wired to 2 ohms a piece, then bridged for 1 ohm to the amp, they are both in separate sealed boxes with a volume of 1.25 CU.FT.[/COLOR] [/QUOTE]

Verification