Reply to thread

Message: <blockquote data-quote="Phoenix Risen" data-source="post: 7291868" data-attributes="member: 623425">no its not irrelevant,  your setup could be low power at a low ohm load which will send a lower voltage out of the amp (in the 20v range) which the lights can take for short bursts but will eventually cook them.his setup could easily be the same or slightly more power at a higher ohm load which will cause the amp to put out a higher voltage (could easily 50v with a 4 ohm load) which will fry set after set of lights if you keep hooking them up that way.</blockquote>

Top