Reply to thread

Message

<blockquote data-quote="Blove1991" data-source="post: 4574781" data-attributes="member: 573580">1995 Chevy S10 Single cab....Max dimensions (Gross) 28&quot;H x 50&quot;W x 10&quot;BottomDepth x 5&quot; TopDepthI want this box to be at LEAST 2.5ft^3NET at 32hz with a 6&quot; flared aeroport and/or a MAXIMUM of 3ft^3NET at 32hz with a 6&quot; flared aeroport, (with the port on the driver side) The reason I am needing help designing this, is because I also need an &quot;amp tray&quot; on the BOTTOM LEFT (driver side) hand side of the box. [ Sundown SAZ-1500D (17&quot; L x 9.9&quot; W x 2&quot; H) ]. I would like for the left hand side of the &quot;amp tray&quot; to be open so that I can run my wires straight to it. Also leave a little room on the width and length so that RCA and remote bass wire can run to the other side of the amp.Subs: (2) 10&quot; Alpine Type Arrrggghhhs //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif Displacement of each subs is 0.05 for eachSide notes: If any of the dimensions could be smaller, I would like the width to be smaller so the aeroport can have a little more room to breathe. If the tuning needs to be raised due to space limitations then 33.5hz would be the absolute highest I want to go.Bracing: Add in an extra .10ft^3NET so I can throw a couple of 2x4&#039;s in the boxThe reason I am not able to whip up something for this design is because I am not sure on how to find the displacement of the aeroport and, I tried to tune the box with the aeroport but the length was too long to be able to fit in the box with the subs installed. I also am not sure of how to make the displacement for the amp tray.I don&#039;t think I forgot anything, but if I did please make me aware of it. PM me if your interested in designing this and see if we can&#039;t work something out.</blockquote>

[QUOTE="Blove1991, post: 4574781, member: 573580"] 1995 Chevy S10 Single cab....Max dimensions (Gross) 28"H x 50"W x 10"BottomDepth x 5" TopDepth I want this box to be at LEAST 2.5ft^3NET at 32hz with a 6" flared aeroport and/or a MAXIMUM of 3ft^3NET at 32hz with a 6" flared aeroport, (with the port on the driver side) The reason I am needing help designing this, is because I also need an "amp tray" on the BOTTOM LEFT (driver side) hand side of the box. [ Sundown SAZ-1500D (17" L x 9.9" W x 2" H) ]. I would like for the left hand side of the "amp tray" to be open so that I can run my wires straight to it. Also leave a little room on the width and length so that RCA and remote bass wire can run to the other side of the amp. Subs: (2) 10" Alpine Type Arrrggghhhs [IMG]//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif[/IMG] Displacement of each subs is 0.05 for each Side notes: If any of the dimensions could be smaller, I would like the width to be smaller so the aeroport can have a little more room to breathe. If the tuning needs to be raised due to space limitations then 33.5hz would be the absolute highest I want to go. Bracing: Add in an extra .10ft^3NET so I can throw a couple of 2x4's in the box The reason I am not able to whip up something for this design is because I am not sure on how to find the displacement of the aeroport and, I tried to tune the box with the aeroport but the length was too long to be able to fit in the box with the subs installed. I also am not sure of how to make the displacement for the amp tray. I don't think I forgot anything, but if I did please make me aware of it. PM me if your interested in designing this and see if we can't work something out. [/QUOTE]

Verification