Reply to thread

Message: <blockquote data-quote="joetama" data-source="post: 1728303" data-attributes="member: 564641">Anything greater than a 6 but smaller than a 10 will prolly do good.  Also, keep inmind where you want to cross over so that you have a good overlap so you aren't pushing the tweeter to go too low or the mid to go too high....2.25k to 2.75k is usually a good place to start for crossover points.  Especially with the tweeter you have.  So, really your mid driver should go to atleast 2.75k or 3k without going out of it's range....</blockquote>

Top