Reply to thread

Message

<blockquote data-quote="Nut Hair Trick" data-source="post: 6045797" data-attributes="member: 610343">ok, given the box shape in the pic with the notch for the seat bracket. If I were to run 2 subs, 8&#039;s or 10&#039;s. or multiple 8&#039;s, where would I port the box? My new dimensions&nbsp; for a wedge or triangular shaped enclosure&nbsp; are 51&quot; wide, height up front would be 5.75&quot;, height in rear would be 3&quot;, top panel 19&quot; deep, and bottom panel 17.5&quot; deep. I would of course add the2 1/4x12x15 additions under each sub(like shown in the pic) around the center hump. Total gross volume would be 1.667cuft.Due to the box shape, since I would be running multiple subs, the only viable option would be to port on the front of the box. But then, the height would be sloping down. I could I guess stop way short of the back wall and extend out in both directions of the subs in a t shape.To get max volume, I don&#039;t think there is any way to avoid building around the notch. If I did, and didnt run the box as deep, then I would only have room for (1) 10 ported. This would then probably put me back to running 4-6 6.5&#039;s or a sealed enclosure. Clear as mud? Thoughts?bottom of current box with addition for depth<img src="http://i47.photobucket.com/albums/f166/fullyinvolved/12-6-08038.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></blockquote>

[QUOTE="Nut Hair Trick, post: 6045797, member: 610343"] ok, given the box shape in the pic with the notch for the seat bracket. If I were to run 2 subs, 8's or 10's. or multiple 8's, where would I port the box? My new dimensions for a wedge or triangular shaped enclosure are 51" wide, height up front would be 5.75", height in rear would be 3", top panel 19" deep, and bottom panel 17.5" deep. I would of course add the 2 1/4x12x15 additions under each sub(like shown in the pic) around the center hump. Total gross volume would be 1.667cuft. Due to the box shape, since I would be running multiple subs, the only viable option would be to port on the front of the box. But then, the height would be sloping down. I could I guess stop way short of the back wall and extend out in both directions of the subs in a t shape. To get max volume, I don't think there is any way to avoid building around the notch. If I did, and didnt run the box as deep, then I would only have room for (1) 10 ported. This would then probably put me back to running 4-6 6.5's or a sealed enclosure. Clear as mud? Thoughts? bottom of current box with addition for depth [IMG]http://i47.photobucket.com/albums/f166/fullyinvolved/12-6-08038.jpg[/IMG] [/QUOTE]

Verification