Reply to thread

Message: <blockquote data-quote="97srad750" data-source="post: 4044005" data-attributes="member: 561580"><p>I just took out my MMATS 500.1 and SQ2150, and installed a Kicker ZX700.5. I just used all the same wiring. My new box is wired to 2 ohm (4 D4 subs) correctly. The problem I'm having is the amp is going into protection at a high volume. I'm only using 2 of the 4 channels for the components up front (4 ohm), rear doors (3 ohm not a typo weird ohm load), and 4 x 10's (4 ohm). Would the mids and highs send the amp into protection since those channels are only 2 ohm stable. Like I said I just used the speaker wires that were already there.</p></blockquote><p></p>

Top