Reply to thread

Message: <blockquote data-quote="project f-150" data-source="post: 1829930" data-attributes="member: 566083"><p>ok then the answer to your is yes and no. Yes you could wire it to just one terminal and show the amp 1 ohm. but on that amp the two terminals are actually connected together inside the amp. so to keep the install cleaner just take one of your subs wired at 2 ohms and connect it to one side +/- and then take the other 2 ohm sub and wire it to the other +/-. and your all set</p></blockquote><p></p>

Top