Reply to thread

Message

<blockquote data-quote="trow100" data-source="post: 1609752" data-attributes="member: 550554">I&#039;m installing my Stereo Integrity Mag i got today and i need some help with the amp settings.&nbsp; Its the 12&quot; in a 1.5 sealed box on a audiobahn 1500hct...i know i need a new amp but i&#039;m getting one later.&nbsp; its rated at 500watts at 4 ohms.So i would need to doSqrt(500x4)=44.7 right?Also not sure about the other setting on the amp itself.&nbsp; These are what i have.Bass Boost-Freq 40-100hz-Gain 0-18dbLPF Freq 40-120hzSubsonic 20-50hz&nbsp;&nbsp; ON/OFFGain 8-0.2vAbout the only one i know what to do is leave the subsonic off because i have a sealed box right?&nbsp; And the Gain 8-.2 is what i use for the 44.7 right?&nbsp; I have a shitty Multimeter too so i think i might have to go by another one but i want to at least try with the one i have.&nbsp; But what do i do with all of the other settings?&nbsp; I also have a lpf and hpf on my Head unit.&nbsp; what should i set those to?</blockquote>

[QUOTE="trow100, post: 1609752, member: 550554"] I'm installing my Stereo Integrity Mag i got today and i need some help with the amp settings. Its the 12" in a 1.5 sealed box on a audiobahn 1500hct...i know i need a new amp but i'm getting one later. its rated at 500watts at 4 ohms. So i would need to do Sqrt(500x4)=44.7 right? Also not sure about the other setting on the amp itself. These are what i have. Bass Boost -Freq 40-100hz -Gain 0-18db LPF Freq 40-120hz Subsonic 20-50hz ON/OFF Gain 8-0.2v About the only one i know what to do is leave the subsonic off because i have a sealed box right? And the Gain 8-.2 is what i use for the 44.7 right? I have a shitty Multimeter too so i think i might have to go by another one but i want to at least try with the one i have. But what do i do with all of the other settings? I also have a lpf and hpf on my Head unit. what should i set those to? [/QUOTE]

Verification