Reply to thread

Message: <blockquote data-quote="Rexdale" data-source="post: 8059054" data-attributes="member: 652643"><p>So I got it installed seems installed right to me ,what happens is idle voltage is low 13.0 an at idle turning the dial left or right doesn't increase or decrease voltage but when I rev my engine from idle rpm 800 to 1000 rpm voltage jumps to 15.0v an I can turn the dial to increase or decrease , I clamped the alt an it put out 170a at 2000 rpm , im using a 12v relay 5 pin , constant power wire from batt to relay , ignition wire to relay ,wire from negative batt post to relay ,then the power wire from relay to reg , reg is grounded off to firewall , an 2 wires from alt to reg ,ground an field. I really need some help with this any thoughts please</p></blockquote><p></p>

Top