Reply to thread

Message

<blockquote data-quote="Alrojoca" data-source="post: 7831947" data-attributes="member: 638714">Cool,&nbsp; my only concern was if the Eclipse had enough juice to run the JBL MS series @ 8 ohms and a set of Dayton&#039;s small woofers, they are good just need good power,&nbsp; Hopefully the Eclipse amp has under rated power and you may have to set the gains very high,&nbsp; hopefully it can handle the 4 volt RCA&#039;s from the JVC HU.&nbsp;&nbsp; If you went with the other JBL set I mentioned there will be less concerns about power and they can be found cheaper also.&nbsp;&nbsp; Like Zako said you cant go active with the JVC HU for the fronts since it just has a basic hi-low pass crossover, not a 2 way or 3 way&nbsp; like the other units Zaco mentioned, it get too complicated, the HAT components Zaco mentioned are good very efficient and very popular here on the forum.&nbsp; In any case, with the simple high low pass xover from the JVC you could filter the sound actively to the Dayton drivers but not the front components.&nbsp; I wish I knew more about box building, maybe someone else can give you advice on that.Keep us posted and maybe post a few pics if you can.</blockquote>

[QUOTE="Alrojoca, post: 7831947, member: 638714"] Cool, my only concern was if the Eclipse had enough juice to run the JBL MS series @ 8 ohms and a set of Dayton's small woofers, they are good just need good power, Hopefully the Eclipse amp has under rated power and you may have to set the gains very high, hopefully it can handle the 4 volt RCA's from the JVC HU. If you went with the other JBL set I mentioned there will be less concerns about power and they can be found cheaper also. Like Zako said you cant go active with the JVC HU for the fronts since it just has a basic hi-low pass crossover, not a 2 way or 3 way like the other units Zaco mentioned, it get too complicated, the HAT components Zaco mentioned are good very efficient and very popular here on the forum. In any case, with the simple high low pass xover from the JVC you could filter the sound actively to the Dayton drivers but not the front components. I wish I knew more about box building, maybe someone else can give you advice on that. Keep us posted and maybe post a few pics if you can. [/QUOTE]

Verification