Reply to thread

Message: <blockquote data-quote="raverx3m" data-source="post: 7234631" data-attributes="member: 563973">im planning to build a good quality system in my del sol.heres what i have and will be using.2008 crv oem honda stereo.( i want it to look OEM, i dont like how aftermarket units lok in that car)so im gonna have to work with that since it was the best option i could find for oem uniti also took out the kac-x4r kenwood amp from my integrait has an onboard sound processor with EQ time allignment and crossoverVariable high-pass filter (500-5000 Hz, 12 dB/octave)Variable low-pass filter (30-250 Hz, 24 dB/octave)Subsonic Filter (24 dB at 15 Hz)speaker wise i want to have a 3 way setup in front doors and use the rear pods to build sub enclosures for the tang band 6.5 subs from parts express.and most likely the rest of the speakers would be also from there.so the bottleneck is what speakers should i run with this amp.the tang bands are 50w RMS per speaker which is well within amps abilities.but since it has a built in crossover i thought id save some money on building a crossover and run midbass on a separate channel from midrange/tweeter(and have a passive crossover separating mid/tweet)then get a small 2 channel amp or one of the xtant 1.1 amps to run the subs.i have the xtant as well.the reason why is because i really like the sound of paper cone speakers and titanium tweeters and alot of the 3 way systems are a bit out of my price range.</blockquote>

Top