Reply to thread

Message: <blockquote data-quote="phil306" data-source="post: 5110604" data-attributes="member: 577562">It won't be any louder to get 2 ohm components. Usually speakers with a lower Re have lower efficiency ratings in turn are just as loud as the 4ohm components but now you have to use more power to get them there.My choice would be a high efficiency 4ohm driver.I wouldn't switch impedances around when working with components. A 2 ohm mid with the tweeter, then of course the crossover you will end up with some finky impedance loads at the amp which could potentially be dangerous.</blockquote>

Top