Reply to thread

Message

<blockquote data-quote="Anonymous" data-source="post: 1385023" data-attributes="member: 558845"><p>So i should get rid of the circuit breaker and replace it with a 300A fuse and check my grounds and get the big three done?&nbsp; Will that stop my battery light from coming on and shutting down my system? Because i had this same setup sealed and i had no problems then i went ported and now my battery light comes on and the circuit breaker shuts the system down.&nbsp; Will the fuse go in the same place as the circuit breaker?&nbsp; Do i need to upgrade my circuit breaker too or just get rid of it and do i need a separate fuse for my 200.4 if so what size. I also have a 1 farad cap should i upgrade that? Does anyone have around the same setup if so tell what you use to keep voltage up because i really don&#039;t think i need an alt because it did fine in the sealed box. Do you think the grounds could be grounding wrong because it was fine when i got it from one shop then i took it to another shop to have the ported box built and it has not been right since. Pretty much i am asking if upgrading my fuse and wires and securing the grounds will give me enough voltage?</p></blockquote><p></p>

[QUOTE="Anonymous, post: 1385023, member: 558845"] So i should get rid of the circuit breaker and replace it with a 300A fuse and check my grounds and get the big three done? Will that stop my battery light from coming on and shutting down my system? Because i had this same setup sealed and i had no problems then i went ported and now my battery light comes on and the circuit breaker shuts the system down. Will the fuse go in the same place as the circuit breaker? Do i need to upgrade my circuit breaker too or just get rid of it and do i need a separate fuse for my 200.4 if so what size. I also have a 1 farad cap should i upgrade that? Does anyone have around the same setup if so tell what you use to keep voltage up because i really don't think i need an alt because it did fine in the sealed box. Do you think the grounds could be grounding wrong because it was fine when i got it from one shop then i took it to another shop to have the ported box built and it has not been right since. Pretty much i am asking if upgrading my fuse and wires and securing the grounds will give me enough voltage? [/QUOTE]

Verification