Reply to thread

Message: <blockquote data-quote="squeak9798" data-source="post: 1499305" data-attributes="member: 555320">Kickpanels are generally the #1 location for good imaging/etc.  Place both the mid and tweeter in the kickpanel if at all possible.With a lot of processing, stock locations can work....but you'd also need to run active instead of passive.Check with your local dealer.  But custom kickpanels will cost an arm and a leg (possibly $500+ for a good set from a reputable installer/shop).  You can check with Q-Logic and see if they make any Qforms for your particular truck.  But if you went the way of Qforms, you'd need to do some work to reinforce them aswell.</blockquote>

Top