Reply to thread

Message: <blockquote data-quote="cumsock991" data-source="post: 8912457" data-attributes="member: 694154">i have an enclosed dual 12 subs from Qpower, an 1800rms amp from skar. and some shitty 1000watt amp thats like 500rms i want to use for my door speakers. i plan on buying some 6.5s and tweeters for the front and laid out a improptu plan. lmk is theres any discrepencies or if im doing something totally wrongUpgrade battery to chassis ground (0G)Upgrade alternator positive to battery (0G)Install engine block to chassis ground (0G)Run main power wire from battery to fuse holder (0G)Install fuse holderInstall PDBRun main power wire from fuse holder to PDB (0G)Install GDB, ground to chassis (0G)Install both ampsInstall DSPRun wire from both amps to PDB (4G)Run wire from DSP to PDB Run wire from both amps to GDB (4G)Run wire from DSP TO GDBOn drivers side run wire from head unit to DSP (RCA)On drivers side run remote wire from head unit REM to DSP remote INRun REM wire from DSP remote out to both amps REM terminalsRun wire from 2000w amp to 12’s (10G)Run wire from 1000w amp to 6.5’s (12G)Run wire from 1000w amp to tweeters (16G)i have never installed car audio on my own, so this is proving quite difficult</blockquote>

Top