Reply to thread

Message: <blockquote data-quote="shaun_bayarea" data-source="post: 562347" data-attributes="member: 557087">ok so i bought a amplified bazooka tube and install kit today and have spent the last 2 hours trying to install it and am not getting anywhere so i'm thinking it has to do with one of these......1- how are you supposed to attach the wire from the tube to the battery. i found a place to run it through the firewall so thats not the problem. the cable that comes in the install package is a heavy cable than what is coming out of the tube but i dont think that should make a difference since thats what the guys at circuit city gave me for it. also on the end of the cable that is supposed to connect to the battery has a loop on it like it's supposed to go around the battery prong but it's waay to small to fit so i tryed putting it behind the screw that loosens the battery clips and i tryed just having it clipped between the prong and the clip...i finally tryed cutting the whole loop thing off and stripped about a half inch of cable and ran that in between the prong and the clip and still nothing.2- i havent connected the ground wire to the chassis like it said to but thats only because i dont have a drill and therefore cant. i tryed attaching the loop to it and just pressing it against to chassis but it didnt make a difference.3- and then theres the remote turn on line. it said to either connect it to your head unit under the antenna connection or under the accessorys but i couldnt find anyway to do either of those so i looked in the manual and it said that as a last resort you can just connect auto turn on wires and turn it to on and it should work..sorry for the lond post, i'm calling up circuit city tomorrow but i thought maybe one of you guys could help me out first...shaun</blockquote>

Verification

Top

What's new

Forum list