Reply to thread

Message

<blockquote data-quote="captnfangdango" data-source="post: 6155702" data-attributes="member: 612694">the box is close to the seat.....i had to cut a block of wood and place it behind the driver seat to space it from the sub....only too a 2&quot; block and the clerance isn&#039;t an issue now.......and yes its 3/4 inch partical .........this isn&#039;t the first time i&#039;ve built a sealed box.......just the first time one of this size........usually its only 10&#039;s or 12&#039;s and only one or two....i have listened to it with the doors and windows open and closed...........hits real hard either way.........im useing a custic crossover(powered) tuned to 35hz.......i&#039;m thinking about adding some poly fill (about one bag per side) and see if that will smooth out the bass and.......it just seems real punchy not smooth.......the bass on the head unit is all the way to -7, and the bass knobs one the amp is set to about 10&#039;oclock.............thanks for the input so far............mostly i was worried about the air space in the box being wrong.............</blockquote>

[QUOTE="captnfangdango, post: 6155702, member: 612694"] the box is close to the seat.....i had to cut a block of wood and place it behind the driver seat to space it from the sub....only too a 2" block and the clerance isn't an issue now.......and yes its 3/4 inch partical .........this isn't the first time i've built a sealed box.......just the first time one of this size........usually its only 10's or 12's and only one or two.... i have listened to it with the doors and windows open and closed...........hits real hard either way.........im useing a custic crossover(powered) tuned to 35hz.......i'm thinking about adding some poly fill (about one bag per side) and see if that will smooth out the bass and.......it just seems real punchy not smooth.......the bass on the head unit is all the way to -7, and the bass knobs one the amp is set to about 10'oclock............. thanks for the input so far............mostly i was worried about the air space in the box being wrong............. [/QUOTE]

Verification