Reply to thread

Message: <blockquote data-quote="los33" data-source="post: 8604897" data-attributes="member: 660834">The bit 10 if its affordable for you should be perfectly fine.As far as a box if you are going for a sealed box then just lookup the jl sub specs and find what size sealed works best.Then find prefabs that fit the specs, for a truck like yours the box will need to be the normal type built that fit under the seat with the transmission hump measured in.As far as the amp just cut a peice of wood out and screw the amp to the wood so you can drill the wood into the back wall under the window behind the backseat.Edit: no seat lift is needed since the sub should be pointed to the floor so the seat incline will give more space for the motor.Sent from my Moto G4 using Tapatalk</blockquote>

Top