Reply to thread

Message

<blockquote data-quote="negativezeroz" data-source="post: 2192636" data-attributes="member: 554952">1/0 - Get atleast say 25ft so you can get a nice run to the distro and have some for Big 3.4awg- I&#039;d get atleast like 15-20ft so you have enough for your amps and if you mess up or something its nice to have extraRCA&#039;s - How ever long it is from your brain to the amps..So I guess you&#039;d need one 4ch and one 2ch...Distro - One (1/0) input and two (4awg) outputs..fused distro would be a nice ideaRemote Wire - I&#039;d get atleast like 25-30ft...Cheap stuff right there..again just however long it is from your brain to one of your amps THEN the extra amount from one amp to otherFuse holder(s) and fuses - If you plan on doing the Big 3, then get two ANL fuseholders: One for power wire and one for wire from alt to battery. Then fuse wise: whatever your alt is rated at (say 120 then get 150A fuse) for the Big 3 upgrade fuseholder, then whatever the combined current draw of both amps you will need one for the MAIN power wire. Then fuse each 4awg individually based on each amps current drawMisc- Ring terminals, new battery terminals (if needed)KnuKonceptz would be your best bet or PM Johnecon2001. I got a great deal on all my wiring, terminals, fuseholders, etc...he carries Tsunami wiring</blockquote>

[QUOTE="negativezeroz, post: 2192636, member: 554952"] [B]1/0 -[/B] Get atleast say 25ft so you can get a nice run to the distro and have some for Big 3. [B]4awg- [/B]I'd get atleast like 15-20ft so you have enough for your amps and if you mess up or something its nice to have extra [B]RCA's - [/B]How ever long it is from your brain to the amps..So I guess you'd need one 4ch and one 2ch... [B]Distro - [/B]One (1/0) input and two (4awg) outputs..fused distro would be a nice idea [B]Remote Wire - [/B]I'd get atleast like 25-30ft...Cheap stuff right there..again just however long it is from your brain to one of your amps THEN the extra amount from one amp to other [B]Fuse holder(s) and fuses - [/B]If you plan on doing the Big 3, then get two ANL fuseholders: One for power wire and one for wire from alt to battery. Then fuse wise: whatever your alt is rated at (say 120 then get 150A fuse) for the Big 3 upgrade fuseholder, then whatever the combined current draw of both amps you will need one for the MAIN power wire. Then fuse each 4awg individually based on each amps current draw [B]Misc-[/B] Ring terminals, new battery terminals (if needed) KnuKonceptz would be your best bet or PM Johnecon2001. I got a great deal on all my wiring, terminals, fuseholders, etc...he carries Tsunami wiring [/QUOTE]

Verification