Reply to thread

Message

<blockquote data-quote="EviLLLLSiNz" data-source="post: 1495556" data-attributes="member: 565700">still need help... i made my ground 2 9awg wires. i tried rewiring the rca cables thinking they too close to the battery wire, that wasnt the case. took out sub tested on home amp again, worked perfect. so that means it isnt my wire coming from sub, not the sub, not the rca cables, not the battery cable, and not the ground... it only leaves the remote cable or the amp. so eitherA. the remote cable is messed up which i dont think it isB. my headunit is defectiveC. the amp is defectiveso now what do i do.... and i found the manual for this guide and there is like, no gain settings on this amp or somethingmanual is here: <a href="http://www.stylestandard.net/oswego/login/alpinelogin" target="_blank">http://www.stylestandard.net/oswego/login/alpinelogin</a>login without a sn, owners manuals, amplifiers, go in archives, v12 amps, and click on mrd-m500ALSO when i turn the low pass filter to 30hz the sound goes away BUT the sub still moves. i put my hand on it and u can feel it still going even though it is just at 0 volume.</blockquote>

[QUOTE="EviLLLLSiNz, post: 1495556, member: 565700"] still need help... i made my ground 2 9awg wires. i tried rewiring the rca cables thinking they too close to the battery wire, that wasnt the case. took out sub tested on home amp again, worked perfect. so that means it isnt my wire coming from sub, not the sub, not the rca cables, not the battery cable, and not the ground... it only leaves the remote cable or the amp. so either A. the remote cable is messed up which i dont think it is B. my headunit is defective C. the amp is defective so now what do i do.... and i found the manual for this guide and there is like, no gain settings on this amp or something manual is here: [URL="http://www.stylestandard.net/oswego/login/alpinelogin"]http://www.stylestandard.net/oswego/login/alpinelogin[/URL] login without a sn, owners manuals, amplifiers, go in archives, v12 amps, and click on mrd-m500 ALSO when i turn the low pass filter to 30hz the sound goes away BUT the sub still moves. i put my hand on it and u can feel it still going even though it is just at 0 volume. [/QUOTE]

Verification