Reply to thread

Message

<blockquote data-quote="Rx8 Arachnid" data-source="post: 8093392" data-attributes="member: 653036">Ok so recently I blew some subs so I am planning a new set up, the major issue was the cost.Everything was to be replaced when the subs finally blew because my system was only suppost to be temporary, but they blew sooner than anticipated.Now at the moment I have the money for the set up except for a new amp.As it stands, I have a 1800watt MAX POWER monoblock boss onyx amp. It is stable for both 2 ohms and 4 ohms&nbsp; (Yes a monoblock stable at 2 ohms. Its awesome right?)At 2 ohms it runs 1800 watt max power (I couldn&#039;t find rms on either ohms just max)At 4 ohms it runs 900 wattI am looking at 2 T6 Woofers from soundstreamIts RMS is 900 and they have Dual 4-Ohm 2.5&quot; Voice CoilsCan I match these two together?I was planning on matching from the amp in order from one sub to the next sub+ terminal to + terminal on first DVC sub and then link it to one + on the other subSame wiring goes for - terminalsAs for the second terminals on both subs, being it a dual voice coil I was, on each sub, going to connect together the + and the - on each sub individualy instead of running it from one sub to the next.Thanks guys,Matt</blockquote>

[QUOTE="Rx8 Arachnid, post: 8093392, member: 653036"] Ok so recently I blew some subs so I am planning a new set up, the major issue was the cost. Everything was to be replaced when the subs finally blew because my system was only suppost to be temporary, but they blew sooner than anticipated. Now at the moment I have the money for the set up except for a new amp. As it stands, I have a 1800watt MAX POWER monoblock boss onyx amp. It is stable for both 2 ohms and 4 ohms (Yes a monoblock stable at 2 ohms. Its awesome right?) At 2 ohms it runs 1800 watt max power (I couldn't find rms on either ohms just max) At 4 ohms it runs 900 watt I am looking at 2 T6 Woofers from soundstream Its RMS is 900 and they have Dual 4-Ohm 2.5" Voice Coils Can I match these two together? I was planning on matching from the amp in order from one sub to the next sub + terminal to + terminal on first DVC sub and then link it to one + on the other sub Same wiring goes for - terminals As for the second terminals on both subs, being it a dual voice coil I was, on each sub, going to connect together the + and the - on each sub individualy instead of running it from one sub to the next. Thanks guys, Matt [/QUOTE]

Verification