Reply to thread

Message

<blockquote data-quote="Audion00b" data-source="post: 7514852" data-attributes="member: 637217">Hi! I&#039;m pretty much brand-new to your forums, and I have alot of questions that I am not seeming to find elsewhere.Basically:&nbsp; I have already decided to go with a ported/vented sub box. I personally have an enclosed in my car, but this is for a family members who wants it for other reasons. I want to build the enclosure specifically for the subwoofer driver I will be using.The sub drivers are the power-acoustik p3-12w (only one driver) On the PA page you can pull up the driver specs. I will be driving it withing the rated rms/peak with a mono sub amp, and I have done all of the wiring as professional as it can get. I don&#039;t want to cut ANY corners!I&#039;m a pretty smart cookie, and I enjoy doing everything myself, but being that I am brand new to building enclosures, things can get overwhelming even though it is/may seem simple.The car I will be installing it into is a 2002/3 toyota avalon (in the trunk) and the trunk looks like this. h t t p : / / g o o . g l / s U x o J (minus the onslaught of spaces lol)With the measurements of (35 inches length, 13 inches height clearance, and a depth of 1 foot+) the depth can be lengthed, but Being that I am aiming for a rectangle box, depth is already a little big.I am just kind of confused with how to calculate the proper box enclosure size, and how to port it properly. I already know how to build them properly, I just need to know what I&#039;m building lol.</blockquote>

[QUOTE="Audion00b, post: 7514852, member: 637217"] Hi! I'm pretty much brand-new to your forums, and I have alot of questions that I am not seeming to find elsewhere. Basically: I have already decided to go with a ported/vented sub box. I personally have an enclosed in my car, but this is for a family members who wants it for other reasons. I want to build the enclosure specifically for the subwoofer driver I will be using. The sub drivers are the power-acoustik p3-12w (only one driver) On the PA page you can pull up the driver specs. I will be driving it withing the rated rms/peak with a mono sub amp, and I have done all of the wiring as professional as it can get. I don't want to cut ANY corners! I'm a pretty smart cookie, and I enjoy doing everything myself, but being that I am brand new to building enclosures, things can get overwhelming even though it is/may seem simple. The car I will be installing it into is a 2002/3 toyota avalon (in the trunk) and the trunk looks like this. h t t p : / / g o o . g l / s U x o J (minus the onslaught of spaces lol) With the measurements of (35 inches length, 13 inches height clearance, and a depth of 1 foot+) the depth can be lengthed, but Being that I am aiming for a rectangle box, depth is already a little big. I am just kind of confused with how to calculate the proper box enclosure size, and how to port it properly. I already know how to build them properly, I just need to know what I'm building lol. [/QUOTE]

Verification