Reply to thread

Message

<blockquote data-quote="Phil R" data-source="post: 6405522" data-attributes="member: 615818">I need (2x) 4awg to 8awg single in/single out and (2x) 4awg to 8awg single in/double out. I also need (2x) 8awg to 8awg single in single out. All without fuse holders. I just need terminals as the whole setup will be fused externally.This is what Im looking for terminals/distribution block wise.<a href="http://www.woofersetc.com/p2776/PDB5...tion-Block.htm" target="_blank">http://www.woofersetc.com/p2776/PDB5...tion-Block.htm</a>I will be running a stinger circiut breaker before all of these. Instead of a fuse holder. Which breaker should I use amp wise? 80/100/135/150/200? I will be running the memphis MCA2004 (1x40amp), MCA3004 (2x25amp), and MCA1400 (5x30amp). From what I read if I go by the amps I will need a 240 amp circiut breaker but if I go by the wire all I need is 150 amp ciriut breaker, so far they say go by wire not amps. But I dont know, should I do two sperates? One for the AB amps which would be a 100amp and one for the D class which would be 150amp?These are the circuit breakers I will be using in place of doing an AUG fuse.<a href="http://www.woofersetc.com/index.cfm?...date+Selection" target="_blank">http://www.woofersetc.com/index.cfm?...date+Selection</a></blockquote>

[QUOTE="Phil R, post: 6405522, member: 615818"] I need (2x) 4awg to 8awg single in/single out and (2x) 4awg to 8awg single in/double out. I also need (2x) 8awg to 8awg single in single out. All without fuse holders. I just need terminals as the whole setup will be fused externally. This is what Im looking for terminals/distribution block wise. [URL="http://www.woofersetc.com/p2776/PDB5...tion-Block.htm"]http://www.woofersetc.com/p2776/PDB5...tion-Block.htm[/URL] I will be running a stinger circiut breaker before all of these. Instead of a fuse holder. Which breaker should I use amp wise? 80/100/135/150/200? I will be running the memphis MCA2004 (1x40amp), MCA3004 (2x25amp), and MCA1400 (5x30amp). From what I read if I go by the amps I will need a 240 amp circiut breaker but if I go by the wire all I need is 150 amp ciriut breaker, so far they say go by wire not amps. But I dont know, should I do two sperates? One for the AB amps which would be a 100amp and one for the D class which would be 150amp? These are the circuit breakers I will be using in place of doing an AUG fuse. [URL="http://www.woofersetc.com/index.cfm?...date+Selection"]http://www.woofersetc.com/index.cfm?...date+Selection[/URL] [/QUOTE]

Verification