Reply to thread

Message: <blockquote data-quote="OLD_SCHOOL" data-source="post: 533905" data-attributes="member: 556272">well that is where your first port wall will mount flush against the back side of the front wall (baffle) so the front bafffle will be whatever you decide for width minus 2 inches for your port if you decided to go that way. remeber though those numbers above where just rough numbers with no bracing and guessed at sub displacement.also those measurements are made using the two side ontop of the top and bottom and face and back insde so all your measurements are off.also you may wanna wait and see if someone like jmac or steve comes in and gives a thumbs up on my numbers</blockquote>

Top