Reply to thread

Message

<blockquote data-quote="Rawr-DQ" data-source="post: 2930968" data-attributes="member: 558585">as for the cuts, it depends on the way you want to do it, one side will over lap and will come out to w/e depth/width/height you use (13.5/27/30.5)the other side will lose 1.5&quot;s if you use 3/4&quot; mdf..if you did the top and bottom 27x30.5, the front/back would be 12x29 or 12x30.5...then the sides would be 12x27 or 12x25.5.....just depends what side you want to overlap for the extra strength/baffle...something along those lines....got it?more pics =p...I guess I recommend doing the:top and bottom 25.5x29&nbsp; (x2)front/back 13.5x30.5 (x2)sides 13.5x25.5 (x2)tell me what you want to do and I&#039;ll work out the port/ect cuz I dunno where you want the port and subs, it all depends on what side will be the baffle.I was kinda thinking you&#039;d do it the way most people would, but I didn&#039;t think about firing up, I was thinking firing back or forward.</blockquote>

[QUOTE="Rawr-DQ, post: 2930968, member: 558585"] as for the cuts, it depends on the way you want to do it, one side will over lap and will come out to w/e depth/width/height you use (13.5/27/30.5) the other side will lose 1.5"s if you use 3/4" mdf..if you did the top and bottom 27x30.5, the front/back would be 12x29 or 12x30.5...then the sides would be 12x27 or 12x25.5.....just depends what side you want to overlap for the extra strength/baffle...something along those lines.... got it? more pics =p ...I guess I recommend doing the: top and bottom 25.5x29 (x2) front/back 13.5x30.5 (x2) sides 13.5x25.5 (x2) tell me what you want to do and I'll work out the port/ect cuz I dunno where you want the port and subs, it all depends on what side will be the baffle. I was kinda thinking you'd do it the way most people would, but I didn't think about firing up, I was thinking firing back or forward. [/QUOTE]

Verification