Reply to thread

Message: <blockquote data-quote="Volenti" data-source="post: 2976679" data-attributes="member: 566487">There's a couple of ways to do this, exactly what depends on what x-overs your amps and headunit have.For example, if your headunit has hi/low filters onboard you could low pass the output going to the midbass amp at 150hz, then on the amp you would set the high pass at 50hz, giving you the bandpass filter from 50-150hz. If your headunit can't do that you could buy a cheap basic active x-over to do the lowpass before the amp.So essentially if your amps have good built in x-overs, all you need is an external 2 way active x-over to do what you want to do.</blockquote>

Top