Reply to thread

Message

<blockquote data-quote="Lowflyin" data-source="post: 7381482" data-attributes="member: 628086">On my boat we had a directed 650 5 channel powering 4 speakers and a kenwood sub. Well, there is something wrong with it because it cuts in and out so I am looking for a new amp with around the same power ratings. Thanks.SPECIFICATIONS:50 watts RMS per channel @ 4 ohm, 20 to 20,000 Hz,75 watts RMS per channel @ 2 ohm, 20 to 20,000 Hz,250 watts RMS (subwoofer channel) into 4 ohm,350 watts RMS (subwoofer channel) into 2 ohm,650 watts RMS (total system power ) into 2 ohm,Dynamic Power Rating (minimum load/14.4VDC)800 wattsSignal-to-Noise RatioGreater than 95 dBFrequency response20-20000 Hz ± 0.5 dBDamping Factor @ 4 ohm&amp;gt; 100Input Impedance20 kohmInput Sensitivityvariable from 150mV to 8 voltsOutput Impedancestable to 2 ohmSupply Voltage9 to 16 VDCHeat Sink Dimensions (H x W x L)2&quot; x 8-3/4&quot; x 14-15/16&quot;</blockquote>

[QUOTE="Lowflyin, post: 7381482, member: 628086"] On my boat we had a directed 650 5 channel powering 4 speakers and a kenwood sub. Well, there is something wrong with it because it cuts in and out so I am looking for a new amp with around the same power ratings. Thanks. SPECIFICATIONS: 50 watts RMS per channel @ 4 ohm, 20 to 20,000 Hz, 75 watts RMS per channel @ 2 ohm, 20 to 20,000 Hz, 250 watts RMS (subwoofer channel) into 4 ohm, 350 watts RMS (subwoofer channel) into 2 ohm, 650 watts RMS (total system power ) into 2 ohm, Dynamic Power Rating (minimum load/14.4VDC) 800 watts Signal-to-Noise Ratio Greater than 95 dB Frequency response 20-20000 Hz ± 0.5 dB Damping Factor @ 4 ohm > 100 Input Impedance 20 kohm Input Sensitivity variable from 150mV to 8 volts Output Impedance stable to 2 ohm Supply Voltage 9 to 16 VDC Heat Sink Dimensions (H x W x L) 2" x 8-3/4" x 14-15/16" [/QUOTE]

Verification