Reply to thread

Message: <blockquote data-quote="~Magick_Man~" data-source="post: 2635774" data-attributes="member: 560423">i dont think i will have time to finish it right now.i have to go to work.so i will give you the two different angles the faces are on.and you should be able to sit down with a piece of paper and figure out the pieces since you have the dimensions.the faces that the subs mount on are on a 73° angle.and the center console section is laid back on a 83.5° angle.you should be able to get the cut list with that info.but if not and nobody else has done it by the time i get off work i will finish it up for you.~Magick_Man~</blockquote>

Top