Reply to thread

Message: <blockquote data-quote="Buckshot" data-source="post: 1575510" data-attributes="member: 558642">The box looks good man.  The cuts look straight, and overall the **** thing looks square!Somthing to consider:Yes this.  Along with that fact, think of it like this.  If you have a 12 inch tall joint (90° Right angle standard joint.) and you have 1 screw every 2 inchs or so...If that one screws shaft was only .125 inchs (1/8) and you have 6 screws in that joint that means you have used 3/4in^2 in holes essentially, when it really could be a solid chemically bonded wood joint.Somthing on a scale as small as this doesn't make all that big of a difference, but I was just pointing it out...</blockquote>

Top