Reply to thread

Message: <blockquote data-quote="GCAdidas13" data-source="post: 1650502" data-attributes="member: 557864">well with little or no warning and no substantial abuse, one of the two coils on one of my pair of idq8s now reads full resistance.  not 0 resistance and certainly not the 3.6 nominal that the other coil has.the speaker cut in and out for a while, i thought it sounded much like a loose speaker terminal, and got lazy on taking the speaker out to check it.  but i did it today and everything was tight.so first i hooked each coil up to a battery and one side gave me a response and the other side did not, then checked resistance and one side gave me 3.6 ohms and the other side reported no connection.what do i do?</blockquote>

Top