Reply to thread

Message

<blockquote data-quote="redfish8" data-source="post: 4087745" data-attributes="member: 586623">well this is my first system and my first post so hello to everyone.well i ordered 2 12&#039;s kickers l7&#039;s today got a deal on them and i was wondering what would be a good box to be built for these subs i want to go ported after reading about these subs being ported.i figured i would go around 2.6net per sub so i need a box thats 5.2net after port and sub displacementso i read up on how to make boxes and do the math this is what i came up withinternal measurements24.5x29.5x15.5=6.5minus .20 for sub displacementleaves 6.3cuftonly other thing i need to do is figure out the port length and height for this box to be tuned at 33hz the port area if possible i would like to keep at 1.10&nbsp; at the mostif possible could someone make me a sketch it would be most appreciatedthanks</blockquote>

[QUOTE="redfish8, post: 4087745, member: 586623"] well this is my first system and my first post so hello to everyone. well i ordered 2 12's kickers l7's today got a deal on them and i was wondering what would be a good box to be built for these subs i want to go ported after reading about these subs being ported. i figured i would go around 2.6net per sub so i need a box thats 5.2net after port and sub displacement so i read up on how to make boxes and do the math this is what i came up with internal measurements 24.5x29.5x15.5=6.5 minus .20 for sub displacement leaves 6.3cuft only other thing i need to do is figure out the port length and height for this box to be tuned at 33hz the port area if possible i would like to keep at 1.10 at the most if possible could someone make me a sketch it would be most appreciated thanks [/QUOTE]

Verification