Reply to thread

Message

<blockquote data-quote="Enellz" data-source="post: 4411701" data-attributes="member: 586963">I dont have the big three and Im running about 900 - 950 rms on a 100 amp alt, and I have a Kinetik HC 800 in the back. Its works fine, and its kinda pushing it, but I havent had no problems. Im about to order some 1/0 wire and run it and also do the big three with it. &#039;2) it is fine to run two 4 guage wires from the battery, but its sloppy. Just get some 0 gauge. It&#039;ll save you in the long run (that why Im buying 1/0 wire now, should of done it in the first place.)3) The fuse size is fine, but its kinda pushing it though. I would go ahead and invest an some ANL fuses. Once again do it now dont have to worry about it.4) Just loop the remote wire from one amp to the next5) no underpowering your subs is cool, but eventually you&#039;ll get power hunger and invest and I new amplifer.6) and yes!Edit: D*mn I took to long I wanted to be first</blockquote>

[QUOTE="Enellz, post: 4411701, member: 586963"] I dont have the big three and Im running about 900 - 950 rms on a 100 amp alt, and I have a Kinetik HC 800 in the back. Its works fine, and its kinda pushing it, but I havent had no problems. Im about to order some 1/0 wire and run it and also do the big three with it. ' 2) it is fine to run two 4 guage wires from the battery, but its sloppy. Just get some 0 gauge. It'll save you in the long run (that why Im buying 1/0 wire now, should of done it in the first place.) 3) The fuse size is fine, but its kinda pushing it though. I would go ahead and invest an some ANL fuses. Once again do it now dont have to worry about it. 4) Just loop the remote wire from one amp to the next 5) no underpowering your subs is cool, but eventually you'll get power hunger and invest and I new amplifer. 6) and yes! Edit: D*mn I took to long I wanted to be first [/QUOTE]

Verification