Reply to thread

Message

<blockquote data-quote="beginner" data-source="post: 8273218" data-attributes="member: 661259">Il try and keep it short so I get some answers.Front componentsrear coaxall 4ohmsx100Rockford p450.4&nbsp; 60x4I keep thinking I figured out the problem.&nbsp;&nbsp; This has been happening for a year, I replaced speaker wired, ground power, remote seems good, 3. Something ohms to each speaker and tweeter. Gains set with a dmmIt happens at high volume where there some kind of singing going on. Goes in protection mode for about 10 seconds comes back on and goes back unless I lower the volume.One thing I noticed , replaced all speaker wires today and before I did that I could fade to each speaker and it would happen to all speakers except rlAfter replacing the speaker wires i had my iPod on and it would only go in protection with the rr speaker and no other one. I took that speaker out and threw it on another channel and it went into protection, put that same channel back to original speaker and no protection so I figured the speaker was bad.With the rr speaker disconnected I blasted my iPod for a while with no problemsTook a ride a few hours later and put a CD in and it started again even with that speaker disconnected.&nbsp; Im ******* annoyed with this.&nbsp; Someone please help. Sometimes people will ask something and never come back to respond.&nbsp; I need someone to help me diagnose please.I tested all speakers and got 3.Something ohms , even tweeters.&nbsp; Could it be crossovers?&nbsp; Everything sounds good when working.Thanks</blockquote>

[QUOTE="beginner, post: 8273218, member: 661259"] Il try and keep it short so I get some answers. Front components rear coax all 4ohmsx100 Rockford p450.4 60x4 I keep thinking I figured out the problem. This has been happening for a year, I replaced speaker wired, ground power, remote seems good, 3. Something ohms to each speaker and tweeter. Gains set with a dmm It happens at high volume where there some kind of singing going on. Goes in protection mode for about 10 seconds comes back on and goes back unless I lower the volume. One thing I noticed , replaced all speaker wires today and before I did that I could fade to each speaker and it would happen to all speakers except rl After replacing the speaker wires i had my iPod on and it would only go in protection with the rr speaker and no other one. I took that speaker out and threw it on another channel and it went into protection, put that same channel back to original speaker and no protection so I figured the speaker was bad. With the rr speaker disconnected I blasted my iPod for a while with no problems Took a ride a few hours later and put a CD in and it started again even with that speaker disconnected. Im ******* annoyed with this. Someone please help. Sometimes people will ask something and never come back to respond. I need someone to help me diagnose please. I tested all speakers and got 3.Something ohms , even tweeters. Could it be crossovers? Everything sounds good when working. Thanks [/QUOTE]

Verification