Reply to thread

Message

<blockquote data-quote="audiobaun" data-source="post: 8658902" data-attributes="member: 634282">two four ohm subs wired at 2 ohms is what you are stating those subs are/ SvC 4 ohm subs correct??here is a wiring diagram of the final load to the amplifiers stability ohm load with the subs of which that amp you have is only 4 ohm stable and not 2 ohm stable.And yes.clean your grounding point up to fresh metal and bolt it down.Hit it with a shot of paint to keep corrosion/rusting to a min.or if under the vehicle.. cover with grease.<a href="https://www.the12volt.com/caraudio/subwoofer-wiring-diagrams.asp?Q=2&amp;amp;I=41" target="_blank">https://www.the12volt.com/caraudio/subwoofer-wiring-diagrams.asp?Q=2&amp;amp;amp;I=41</a>You can run at 8 ohm if you want.Amp can handle that no problemor run one sub at 4 ohms mono<a href="https://www.the12volt.com/caraudio/subwoofer-wiring-diagrams.asp?Q=1&amp;amp;I=41" target="_blank">https://www.the12volt.com/caraudio/subwoofer-wiring-diagrams.asp?Q=1&amp;amp;amp;I=41</a>or in stereo mode..ch 1 at + to poss, and neg. to neg on one sub and same on other ch,and switch setting to full on amp and adjust settings</blockquote>

[QUOTE="audiobaun, post: 8658902, member: 634282"] two four ohm subs wired at 2 ohms is what you are stating those subs are/ SvC 4 ohm subs correct??here is a wiring diagram of the final load to the amplifiers stability ohm load with the subs of which that amp you have is only 4 ohm stable and not 2 ohm stable.And yes.clean your grounding point up to fresh metal and bolt it down.Hit it with a shot of paint to keep corrosion/rusting to a min.or if under the vehicle.. cover with grease. [URL="https://www.the12volt.com/caraudio/subwoofer-wiring-diagrams.asp?Q=2&I=41"]https://www.the12volt.com/caraudio/subwoofer-wiring-diagrams.asp?Q=2&amp;I=41[/URL] You can run at 8 ohm if you want.Amp can handle that no problem or run one sub at 4 ohms mono [URL="https://www.the12volt.com/caraudio/subwoofer-wiring-diagrams.asp?Q=1&I=41"]https://www.the12volt.com/caraudio/subwoofer-wiring-diagrams.asp?Q=1&amp;I=41[/URL] or in stereo mode..ch 1 at + to poss, and neg. to neg on one sub and same on other ch,and switch setting to full on amp and adjust settings [/QUOTE]

Verification